Welcome at AHLBORN !

Discover the world of AHLBORN measuring instruments, data logger and sensors ! Please have a look round and get to know more about our family enterprise.

Data logger ALMEMO®

ALMEMO® means one data logger for all measurement - only the sensor needs to be changed. As soon as a sensor is connected, each ALMEMO® measuring instrument or data logger automatically indicates the measuring range and the measured value. When the sensor is changed, no setting is required on the instrument. Any sensor subsequently connected is recognized automatically and the measured value is indicated immediately on the display. Sensors can be changed as and when necessary - even in the course of a measuring operation. It is also possible to store calibration values in the memory chip in the ALMEMO® connector. Subsequent measuring operations can thus be performed with the highest accuracy. The ALMEMO® System

Digital sensors

The ALMEMO® D7 technology allows the digitization of sensor signals. The advantage: If required, digital sensors can be exchanged without loosing the calibration data since the calibration of a digital sensor takes place without a measuring device. Individual sensor parameters are also stored in the connector. Also freely selectable comments can be deposited. In the displays of the devices extended ranges are possible. With 10 measured quantities per D7 connector, simple data loggers become multifunction measuring instruments, even with sensors from other manufacturers. Take advantage and digitize your sensors!

WinControl software

Measuring instruments must be able to interconect with their environment. WinControl is the software for monitoring, evaluation and system integration. For all ALMEMO® measuring instruments and data loggers. WinControl software

DAkkS - Calibration laboratory D-K-19342-01-00

For being able to offer a close to complete calibration range for all measured quantities that can be acquired by the ALMEMO® measuring technology, we maintain a calibration laboratory. Concerning the measured quantities air temperature, air humidity, wind speed and electrical sizes we are accredited according to standard DIN EN ISO/IEC 17025:2018